socktop-swipe

Swipe-to-zoom touchscreen navigation for a wall-mounted socktop dashboard.

One tmux window shows every monitored host tiled together. Swiping right-to-left on the panel zooms into each host full-screen, one at a time; swiping left-to-right walks back out to the overview.

   overview   ->   host 1   ->   host 2   ->   host 3   ->   host 4
   (tiled)         zoomed        zoomed        zoomed        zoomed
       <-------------- swipe left-to-right --------------

Built for a 10" touch panel on a server rack driving four Raspberry Pis, on a low-power x86 box running i3 on X11.

How it works, and why

The carousel is tmux pane zoom, not extra socktop instances. There is exactly one socktop process per host. Zooming calls tmux resize-pane -Z, which makes one pane fill the window and sends SIGWINCH so socktop repaints at the new size.

That matters for three reasons:

• Half the processes. Separate full-screen instances would mean N extra socktop processes and double the polling load on the monitored hosts. On a 1.9 GB display host, that is the difference between comfortable and not.
• No reconnect delay. Hidden panes keep running and stay connected, so swiping back to a host shows current data, not a stale snapshot.
• Constant load. The monitored hosts see the same connections regardless of what is on screen.

Gestures come from lisgd, below the terminal. No Linux terminal maps horizontal swipes to commands, so this cannot be done in terminal config. Critically, libinput deliberately emits gesture events only for touchpads, never for touchscreens — so libinput-gestures and similar tools cannot work here at all. lisgd reads raw touch events and synthesises the swipes itself, reading /dev/input directly and bypassing X.

Requirements

• tmux, socktop, and a working ~/.config/socktop/profiles.json
• lisgd (the installer builds it)
• A C toolchain plus libinput and libX11 headers, to build lisgd
• Membership of the input group (the installer adds you; needs a relogin)

Install

git clone https://gt.wittyoneoff.com/jason/socktop-swipe
cd socktop-swipe
./install.sh --xignore --i3

Then log out and back in — the input group and the X rule both need a fresh session.

Flag	Effect
(none)	Build/install lisgd, install the three scripts and the default config
--xignore	Also tell X to ignore the touch panel (see below — usually wanted)
--i3	Also add i3 autostart lines, with a backup and i3 -C validation

Re-running is safe: an existing config file is never overwritten, and the i3 edit is skipped if already present.

Verify

tools/find-device.sh      # confirm TOUCH_DEV is right
tools/diag.sh             # stage 1: device live?  stage 2: what does lisgd see?
tools/test-foreground.sh  # run the real daemon, watch the display, swipe

Configuration

Everything lives in /usr/local/etc/socktop-swipe.env. Edit it there, not in the repo copy. After changing it, restart the daemon and rebuild the session:

pkill -x lisgd && socktop-gestures &
socktop-rack

Option	Default	What it does
SOCKTOP_HOSTS	four Pi profiles	socktop profile names, in swipe order. Any count works; layout and carousel adapt.
SOCKTOP_SESSION	socktop4	tmux session name
SOCKTOP_BIN	$HOME/.cargo/bin/socktop	Full path — i3 does not have ~/.cargo/bin on PATH
TOUCH_DEV	ILITEK by-id path	Touch device. Always use a /dev/input/by-id/ path; eventN numbers change on reboot.
SCREEN_W / SCREEN_H	1024 / 600	The panel's resolution, not the X screen. See gotcha 2.
SWIPE_THRESHOLD	80	Pixels of travel before a drag counts as a swipe
SWIPE_LENIENCY	30	Degrees off-axis tolerated (max 45)
FINGER_COUNTS	1 2 3	Contact counts accepted. The setting most likely to need changing — see gotcha 1.
GESTURE_IN / GESTURE_OUT	RL / LR	Swap these to reverse swipe direction

Adding or removing hosts

Edit SOCKTOP_HOSTS and run socktop-rack. Nothing else needs touching — the carousel derives its length from the pane count at runtime.

Autostart

./install.sh --i3 appends to ~/.config/i3/config. For systemd user sessions instead:

cp socktop-swipe.service ~/.config/systemd/user/
systemctl --user enable --now socktop-swipe

Either way, run exactly one gesture daemon. lisgd does not grab the input device exclusively, so two instances make every swipe fire twice.

Uninstall

./uninstall.sh                 # scripts, config, X rule
./uninstall.sh --keep-config   # keep your settings

lisgd, the input group and your socktop profiles are deliberately left alone; the script prints how to remove each.

Troubleshooting

Four gotchas account for nearly every failure. All were found the hard way.

1. Gestures are recognised but never fire

Run tools/diag.sh and read stage 2:

[swipe]: Cfg(f=1/s=3/e=0/d=0) <=> Evt(f=2/s=3/e=1/d=2)
         ^ configured             ^ what happened

Matching s= with differing f= means your panel reports more contacts than you configured. Many multipoint panels report 2 or even 3 contacts for a physically one-finger swipe. Add them to FINGER_COUNTS.

Direction enum: 0=DU, 1=UD, 2=LR, 3=RL.

2. Swipes register, but erratically — resizing panes, zooming text

X is also delivering touch to whatever is on screen, so a single swipe hits several consumers at once: tmux mouse mode drags pane borders, the terminal reads 2-contact swipes as pinch-zoom, and socktop enables its own all-motion mouse reporting (?1003h). Meanwhile lisgd fires too.

Fix with ./install.sh --xignore and relog. lisgd is unaffected because it reads the device directly. Trade-off: no tap or pinch-zoom on that panel — terminal keyboard zoom (Ctrl + / Ctrl -) still works.

Also ensure tmux mouse mode is off; socktop-rack sets this.

3. Every swipe jumps two panes

Two lisgd instances are running. pgrep -x lisgd should show exactly one.

4. Swipes do nothing at all

In order: is the session running (tmux ls)? Is the daemon running (pgrep -x lisgd)? Does tools/diag.sh stage 1 read bytes? Are you in the input group (id -nG | grep input, needs a relogin)?

Note lisgd's verbose flag is -v, not -D.

Multi-monitor note

If the display host has a second monitor, X reports the combined root window (e.g. 2304x720). lisgd would scale its maths to that, so SCREEN_W/SCREEN_H must describe the touch panel alone. socktop-gestures always passes them explicitly.

Known limitations

• ~300 ms repaint on zoom-in. Between tmux making the pane full-screen and socktop repainting, you briefly see the old small rendering anchored top-left. This is socktop's redraw latency, not the gesture path; nothing outside socktop can fix it. Zooming out has no visible artifact, since panes return to sizes they were already drawn at.
• Deliberately no wrap-around at the ends of the carousel — on a wall display wrapping makes it impossible to tell where you are.
• X11 only. The lisgd build disables its Wayland backend (WITHOUT_WAYLAND=1).

Tested on

LattePanda (Atom x5-Z8350, 1.9 GB RAM, Cherry Trail graphics), 1024x600 ILITEK DSI touch panel, Debian 11, i3 on X11, Alacritty 0.16.1, lisgd from git, monitoring four Raspberry Pis.