# socktop-swipe configuration.
#
# Copy to ~/.config/socktop-swipe/config.yaml and edit. After every change run
#
#     socktop-swipe validate
#
# which resolves the grid, prints the map and checks that every program it would
# run actually exists.

# ---------------------------------------------------------------------------
# Session
# ---------------------------------------------------------------------------

# tmux session name. Change only if it collides with something else.
session: socktop-swipe

# Terminal that `socktop-swipe run` opens the dashboard in. It is invoked as
#     <terminal> -e tmux attach -t <session>
# Remove this line to attach in the current terminal instead.
terminal: alacritty

# Show a position indicator in the tmux status line: what is above, where you
# are, what is below. Useful once the grid has more than one row.
indicator: false

# Full paths to the monitor programs. i3 and non-login shells do not have
# ~/.cargo/bin on PATH, so setting them here saves repeating a path on every
# screen. A bare name is looked up on PATH. Leading ~/ is expanded.
binaries:
  socktop: ~/.cargo/bin/socktop
  uptime-kuma-status: ~/.cargo/bin/uptime-kuma-status
  unifly: ~/Documents/GitHub/unifly/target/release-small/unifly

# ---------------------------------------------------------------------------
# Touch panel
# ---------------------------------------------------------------------------

touch:
  # ALWAYS a /dev/input/by-id/ path -- eventN numbers get reshuffled on reboot
  # or USB re-enumeration. `socktop-swipe doctor --list` shows the candidates.
  device: /dev/input/by-id/usb-ILITEK_ILITEK-TOUCH-event-if00

  # The PANEL's resolution, not the X screen. With a second monitor attached X
  # reports the combined root window (e.g. 2304x720), which is not this.
  width: 1280
  height: 720

  # Take the panel exclusively, so X never sees the touches. Without this, one
  # swipe reaches several consumers at once: the terminal reads 2-contact swipes
  # as pinch-zoom and socktop turns on its own all-motion mouse reporting. Set
  # false only if you also want touch to work in other applications, and then
  # install the X ignore rule instead -- see the README.
  grab: true

  # Pixels of travel before a drag counts as a swipe. Measured on the ILITEK
  # panel: real swipes land at 150-260px, accidental contact under 70px.
  threshold: 80

  # Degrees off-axis tolerated, maximum 45. Real finger swipes came in 1-25
  # degrees off true horizontal, so 30 leaves comfortable margin.
  leniency: 30

  # Contact counts accepted for one logical swipe.
  #
  # THE SETTING MOST LIKELY TO NEED CHANGING ON NEW HARDWARE. Many multipoint
  # panels report 2 or even 3 contacts for a physically one-finger swipe. If
  # swipes are detected but nothing happens, `socktop-swipe doctor` will say so
  # in as many words.
  fingers: [1, 2, 3]

# Swipe directions, named by finger motion. RL is right-to-left.
gestures:
  forward: RL     # move deeper into the grid
  back: LR
  up: DU
  down: UD

# ---------------------------------------------------------------------------
# The grid
# ---------------------------------------------------------------------------
#
# Each screen sits at "<row>x<col>". Row increases DOWNWARD, so "-1x0" is above
# "0x0" and "1x0" is below it. You start at "0x0".
#
# QUOTE THE COORDINATE. Unquoted, YAML reads 0x0 as the hexadecimal number 0.
#
# Coordinates are ordering, not slots: only their sort order matters, so "0x1"
# and "0x5" are interchangeable. You never have to count how many screens a
# socktop group produces in order to place the thing next to it.
#
# This example is the rack display:
#
#                          unifly            -1x0
#                            |
#       4 Pis  <-> orangepi + trixie         0x0, 0x1
#                            |
#                       uptime kuma          1x0

screens:
  # Swipe UP from anywhere in row 0 to reach this.
  - at: "-1x0"
    type: unifly

  # One cell, five screens: the four Pis tiled, then each Pi zoomed in turn.
  - at: "0x0"
    type: socktop
    socktop_group: [rpi-master, rpi-worker-1, rpi-worker-2, rpi-worker-3]
    layout: tiled

  # Swipe forward past the last Pi to arrive here. socktop_group also accepts a
  # comma-separated string, and layout takes any tmux layout name.
  - at: "0x1"
    type: socktop
    socktop_group: "orangepi, trixie"
    layout: even-vertical

  # Swipe DOWN from row 0. Swiping back up returns to the exact host you left.
  - at: "1x0"
    type: uptime-kuma-status
    url: https://status.wittyoneoff.com/status/wittyoneoff

  # Anything else you want on a screen. `command` works on any type, as an
  # override; for `generic` it is the whole definition.
  #
  # - at: "1x1"
  #   type: generic
  #   title: logs
  #   command: journalctl -f -u k3s-agent