# socktop-swipe

Swipe-to-zoom touchscreen navigation for a wall-mounted
[socktop](https://crates.io/crates/socktop) dashboard.

One tmux window shows every monitored host tiled together. Swiping right-to-left
on the panel zooms into each host full-screen, one at a time; swiping
left-to-right walks back out to the overview.

```
   overview   ->   host 1   ->   host 2   ->   host 3   ->   host 4
   (tiled)         zoomed        zoomed        zoomed        zoomed
       <-------------- swipe left-to-right --------------
```

Built for a 10" touch panel on a server rack driving four Raspberry Pis, on a
low-power x86 box running i3 on X11.

## How it works, and why

**The carousel is tmux pane zoom, not extra socktop instances.** There is exactly
one socktop process per host. Zooming calls `tmux resize-pane -Z`, which makes one
pane fill the window and sends `SIGWINCH` so socktop repaints at the new size.

That matters for three reasons:

- **Half the processes.** Separate full-screen instances would mean N extra
  socktop processes and double the polling load on the monitored hosts. On a
  1.9 GB display host, that is the difference between comfortable and not.
- **No reconnect delay.** Hidden panes keep running and stay connected, so
  swiping back to a host shows current data, not a stale snapshot.
- **Constant load.** The monitored hosts see the same connections regardless of
  what is on screen.

**Gestures come from lisgd, below the terminal.** No Linux terminal maps
horizontal swipes to commands, so this cannot be done in terminal config.
Critically, **libinput deliberately emits gesture events only for touchpads,
never for touchscreens** — so `libinput-gestures` and similar tools cannot work
here at all. [lisgd](https://git.sr.ht/~mil/lisgd) reads raw touch events and
synthesises the swipes itself, reading `/dev/input` directly and bypassing X.

## Requirements

- `tmux`, `socktop`, and a working `~/.config/socktop/profiles.json`
- `lisgd` (the installer builds it)
- A C toolchain plus `libinput` and `libX11` headers, to build lisgd
- Membership of the `input` group (the installer adds you; needs a relogin)

## Install

```sh
git clone https://gt.wittyoneoff.com/jason/socktop-swipe
cd socktop-swipe
./install.sh --xignore --i3
```

Then **log out and back in** — the `input` group and the X rule both need a
fresh session.

| Flag | Effect |
| --- | --- |
| *(none)* | Build/install lisgd, install the three scripts and the default config |
| `--xignore` | Also tell X to ignore the touch panel (see below — usually wanted) |
| `--i3` | Also add i3 autostart lines, with a backup and `i3 -C` validation |
| `--noblank` | Also stop the screen blanking / DPMS power-down (wall displays) |

Re-running is safe: an existing config file is never overwritten, and the i3
edit is skipped if already present.

### Verify

```sh
tools/find-device.sh      # confirm TOUCH_DEV is right
tools/diag.sh             # stage 1: device live?  stage 2: what does lisgd see?
tools/test-foreground.sh  # run the real daemon, watch the display, swipe
```

## Configuration

Everything lives in **`/usr/local/etc/socktop-swipe.env`**. Edit it there, not in
the repo copy. After changing it, restart the daemon and rebuild the session:

```sh
socktop-gestures --replace &   # restarts the daemon, running or not
socktop-rack
```

Use `--replace` rather than `pkill -x lisgd && socktop-gestures`: `pkill` exits
non-zero when it matches nothing, so that one-liner silently starts **nothing**
if no daemon was running — you would swipe, get no response, and reasonably
blame the config change.

| Option | Default | What it does |
| --- | --- | --- |
| `SOCKTOP_HOSTS` | four Pi profiles | socktop profile names, **in swipe order**. Any count works; layout and carousel adapt. |
| `SOCKTOP_SESSION` | `socktop4` | tmux session name |
| `SOCKTOP_BIN` | `$HOME/.cargo/bin/socktop` | Full path — i3 does not have `~/.cargo/bin` on `PATH` |
| `TOUCH_DEV` | ILITEK by-id path | Touch device. **Always use a `/dev/input/by-id/` path**; `eventN` numbers change on reboot. |
| `SCREEN_W` / `SCREEN_H` | `1024` / `600` | The **panel's** resolution, not the X screen. See gotcha 2. |
| `SWIPE_THRESHOLD` | `80` | Pixels of travel before a drag counts as a swipe |
| `SWIPE_LENIENCY` | `30` | Degrees off-axis tolerated (max 45) |
| `FINGER_COUNTS` | `1 2 3` | Contact counts accepted. **The setting most likely to need changing** — see gotcha 1. |
| `GESTURE_IN` / `GESTURE_OUT` | `RL` / `LR` | Swap these to reverse swipe direction |

### Adding or removing hosts

Edit `SOCKTOP_HOSTS` and run `socktop-rack`. Nothing else needs touching — the
carousel derives its length from the pane count at runtime.

## Autostart

`./install.sh --i3` appends to `~/.config/i3/config`. For systemd user sessions
instead:

```sh
cp socktop-swipe.service ~/.config/systemd/user/
systemctl --user enable --now socktop-swipe
```

Either way, **run exactly one gesture daemon**. lisgd does not grab the input
device exclusively, so two instances make every swipe fire twice.
`socktop-gestures` enforces this: it exits non-zero if one is already running,
unless given `--replace`.

## Stopping the screen blanking

A wall display must never blank. `./install.sh --noblank` applies two layers:

1. An Xorg `ServerFlags` snippet with all four timeouts at `0`, so it covers
   every X session including the display-manager greeter, and survives reboots.
2. An `xset s off s noblank -dpms` line in the i3 autostart, because a session
   or DM can re-enable the screensaver after X has started.

Both are needed. `xset` alone does not survive a reboot, and — the trap worth
knowing — **`xset` must run as the session user**. Running `sudo xset ...`, or a
`sudo bash noblank.sh` wrapper, targets root's X connection and silently does
nothing while appearing to succeed. Check the real state with:

```sh
xset q | grep -A1 -E 'Screen Saver|DPMS'
```

You want `timeout: 0`, `prefer blanking: no`, and `DPMS is Disabled`.

### Related: does the display come back by itself?

Blanking is only half of unattended operation. If the display manager has no
autologin configured, a reboot leaves the panel at a login prompt and nothing
autostarts. Check with:

```sh
grep -E '^autologin-(user|session)' /etc/lightdm/lightdm.conf
```

No output means no autologin. Configuring it is out of scope here — it weakens
the machine's security posture and is a deliberate choice, not a default.

## Uninstall

```sh
./uninstall.sh                 # scripts, config, X rule
./uninstall.sh --keep-config   # keep your settings
```

lisgd, the `input` group and your socktop profiles are deliberately left alone;
the script prints how to remove each.

## Troubleshooting

Four gotchas account for nearly every failure. All were found the hard way.

### 1. Gestures are recognised but never fire

Run `tools/diag.sh` and read stage 2:

```
[swipe]: Cfg(f=1/s=3/e=0/d=0) <=> Evt(f=2/s=3/e=1/d=2)
         ^ configured             ^ what happened
```

Matching `s=` with differing `f=` means **your panel reports more contacts than
you configured**. Many multipoint panels report 2 or even 3 contacts for a
physically one-finger swipe. Add them to `FINGER_COUNTS`.

Direction enum: `0=DU`, `1=UD`, `2=LR`, `3=RL`.

### 2. Swipes register, but erratically — resizing panes, zooming text

X is also delivering touch to whatever is on screen, so a single swipe hits
several consumers at once: tmux mouse mode drags pane borders, the terminal
reads 2-contact swipes as pinch-zoom, and socktop enables its own all-motion
mouse reporting (`?1003h`). Meanwhile lisgd fires too.

Fix with `./install.sh --xignore` and relog. lisgd is unaffected because it
reads the device directly. Trade-off: no tap or pinch-zoom on that panel —
terminal keyboard zoom (`Ctrl +` / `Ctrl -`) still works.

Also ensure tmux mouse mode is **off**; `socktop-rack` sets this.

### 3. Every swipe jumps two panes

Two lisgd instances are running. `pgrep -x lisgd` should show exactly one.

`socktop-gestures` refuses to start if a daemon is already running, so this
should not happen via the normal path; `--replace` restarts cleanly. It can
still occur if lisgd was launched by hand.

### 4. Swipes do nothing at all

In order: is the session running (`tmux ls`)? Is the daemon running
(`pgrep -x lisgd`)? Does `tools/diag.sh` stage 1 read bytes? Are you in the
`input` group (`id -nG | grep input`, needs a relogin)?

Note lisgd's verbose flag is **`-v`**, not `-D`.

### Multi-monitor note

If the display host has a second monitor, X reports the **combined** root window
(e.g. 2304x720). lisgd would scale its maths to that, so `SCREEN_W`/`SCREEN_H`
must describe the touch panel alone. `socktop-gestures` always passes them
explicitly.

## Known limitations

- **~300 ms repaint on zoom-in.** Between tmux making the pane full-screen and
  socktop repainting, you briefly see the old small rendering anchored top-left.
  This is socktop's redraw latency, not the gesture path; nothing outside
  socktop can fix it. Zooming out has no visible artifact, since panes return to
  sizes they were already drawn at.
- Deliberately **no wrap-around** at the ends of the carousel — on a wall display
  wrapping makes it impossible to tell where you are.
- X11 only. The lisgd build disables its Wayland backend (`WITHOUT_WAYLAND=1`).

## Tested on

LattePanda (Atom x5-Z8350, 1.9 GB RAM, Cherry Trail graphics), 1024x600 ILITEK
DSI touch panel, Debian 11, i3 on X11, Alacritty 0.16.1, lisgd from git,
monitoring four Raspberry Pis.